Where to store your own car in winter?

One of the factors that strongly influence the appearance and general condition of the car is the storage location. The constant maintenance of a vehicle on the street is considered one of the main factors in the occurrence of serious damage to the body, corrosion of metal parts. Therefore, experts recommend having a place in an underground parking lot or, better, in a garage.

It is especially important to keep the car warm and dry during the winter season. Such a place must meet the following requirements:

low humidity level;
availability of ventilation;
the absence of constant exposure to direct sunlight;
maintaining an optimal temperature regime;
vandal-proof protection.
The car is parked in winter.

How to take care of a car in winter?

Proper care in winter can be provided with the help of high-quality antifreeze, glass care liquid, which contains frost-resistant components. You should not save money and buy cheap washers and antifreeze. Additionally, the condition of the bottom should be monitored. The ingress of salt, sand, and deicing reagents onto the surface provokes damage and rusting. Therefore, before the cold season, a protective layer should be applied to the bottom.

In addition, car care in winter includes changing tires. Wheels with winter tires are less sensitive to icy conditions, which prevents an emergency situation. For those who need to significantly increase the cross-country ability of the vehicle in the winter season, it is recommended to additionally use studded tires or even special chains.

If you take care of your own car, want the vehicle to always have a well-groomed appearance, be protected from rust, we suggest using the services of our self-service car wash in Lviv. Modern equipment for efficient and accurate car washing will be available to you.

Abrasive polishing

If areas with a damaged primer layer are found on the surface during abrasive polishing, then painting is performed before polishing.

Features of abrasive polishing

It is necessary to remember some features of abrasive polishing of cars:

The presence of a grinding machine is necessary;
every time during the procedure, 2-7 microns of paintwork are removed. The thickness of the initial factory coating is usually 80-170 microns. It is also necessary to take into account the thickness of the coating if you bought a used car;
The polishing time and the type of pastes required to achieve the desired effect depend on the severity of the damage. en yeni casino siteleri