Features of storage and movement of quartz agglomerate products

Quartz agglomerate is durable, solid, resistant to loads and dirt, but in order to preserve the appearance of products and plates, they need to be properly stored and moved.Storage specificationslabs and slabs made of agglomerate should be stored in closed warehouses, installed vertically. Racks or stands are designed for 4-6 plates, depending on their thickness. The back plate is completely supported on the frame by the unpolished side, the next one is placed in the same way, with the reverse side facing out, that is, the polished surfaces look at each other. Additionally, the polished surface is covered with a protective film. The remaining pairs of plates are placed similarly, inside by polishing. This protects the agglomerate from contamination and accidental impacts.If the slabs in the racks are stored in an open warehouse, such an installation simultaneously protects the stone from the sun and color burnout. During outdoor storage, the plates must be additionally covered with protective material (film, tarpaulin, burlap).A small tile can be stored horizontally, but the principle of laying is similar to slabs. The polished surfaces look at each other, the tiles are laid in pairs. The upper and lower tiles in the box are always facing outward with the back surface. This protects the tile from scratches and dirt.Features of transportation For the transportation of slabs and products made of quartz agglomerate, transportation racks or boxes are needed. The plate or countertop is securely fixed in a vertical position in the transportation device, which is also installed horizontally on vehicles.For finished products, there is an additional requirement, installation in a drawer or on a rack with a back edge. Support on the front edge is not allowed due to the risk of damaging the surface and the shaped treatment. You can not put countertops, window sills or aprons vertically on the narrow end side, even with a small length.It is necessary to carry the packed plate or product carefully because of the large length and significant weight. Even in the drawer, the movement is always vertical. When carrying horizontally, you can damage the built-in elements, cutouts, narrow parts.It is impossible to pull out products from drawers and racks in advance. They are taken out only at the start of installation to avoid contamination, misalignment and accidental bumps. У этой длинноногой красотки были в постели секс порно в спальне