Thermal insulation of wooden door #003

• Foam is covered with dermatin, leather, glued with liquid nails.

• Another upholstery option can be used. At first, wooden slats, the same thickness as the foam, are nailed around the perimeter.

• Then a heater is inserted between them, which is sewn on top with laminated fiberboard, lining.

If it is not possible to dismantle the door leaf, the insulation of the opening is organized with the help of rollers.

• The insulation tape wrapped in dermatin, made as described above, is nailed directly to the box.

• First, the door is closed, which will help determine the installation location of the roller, when the measurements are completed, they start packing.

• The insulation tape is not nailed to the threshold, there it will quickly wear out, become unusable, cease to perform functions. It would be more rational to fix it at the lower end of the canvas.

Balcony

The balcony door is sheathed with your own hands, it is enough to have a hammer, a construction knife, furniture or construction nails.

• To insulate the entrance opening to the balcony, the door panel is first dismantled, laid horizontally on the floor, and the fittings are removed.

• Then the rollers are prepared, nailed with construction nails to the edge of the balcony door panel, excluding the side where the hinges are located.

From above, you can insulate the entrance with foam rubber, foam sheets, sheathing them with dermatin on top. You can also use isolon, a universal insulation that reliably seals the entrance of the span to the balcony.

External thermal insulation of the door

The door, its exterior decoration is carried out in several ways. To do this, you can use the material, the technologies described above, used for the upholstery of the canvas from the inside.

• At first, the material is painted, making out the entrance, the box with overlays made independently.

• The first to attach the rollers, which will reliably protect the house, seal the box around the perimeter.

• When the pads are fixed, it is necessary to sheathe, insulate the door leaf.

• The material, dermatin or skin, is painted with an allowance on all sides for bending. Then they are covered with a heat insulator, glued or nailed to the door, lining rollers.

• The edges of the upholstery are bent, after which it is fixed with furniture nails.

Advice! If you are not satisfied with the soft upholstery material, fiberboard, plywood will help to insulate the door.

A sheet is cut out of them according to the size of the box, after which it is nailed to the door panel. If there are defects, small cracks, potholes, they should be plastered. After that, the door is glued with self-adhesive films, finished with laminate, veneer.

If the cladding, the installation of linings around the perimeter of the box does not help, it is possible that drafts penetrate into the apartment due to an incorrectly positioned door panel. In this case, it is worth viewing, adjusting the position of the hinges. Also, a lot depends on what time of year the work was carried out. If this happened in the summer, by winter the insulation tape may be slightly deformed, sagging from a sharp temperature drop. You will need to adjust it, or completely replace it. Another way to improve the thermal insulation of a room is to install a double door made of wood and metal, or to put both structures made of wood. https://stayathome.co.in/